Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

It's a good idea to seal the gap after the glass has been removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time, they can suffer from a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. It is crucial to act when you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the hinges at the top and upvc repairs Near me bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as you can to ensure that your Upvc Repairs Near Me windows are watertight and draught-proof.

UPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to shut the window replacement and do a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and wet floors. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the old caulking may require removal before a new layer is applied. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler if you have someone to help hold the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to provide assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. If they're beyond repair, it may be required to realign them. Second, the interlock can also become unbalanced. This happens on the hinge's side, and might require to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be put on top of your window replacement near me sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as possible.